LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Automatic Transmission - 5R110W (TORQSHIFT(R)) -- F450 & F550 Super Duty) >> In-Vehicle Repair >> Transmission Filler Tube >> Installation

Transmission Filler Tube: Installation

WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new transmission fluid filler tube O-ring.
    Fig 1: Locating Transmission Filler Tube O-Ring
    G06140618Courtesy of FORD MOTOR CO.
    2. NOTE: Coat the O-ring at the bottom of the transmission fluid filler tube with transmission fluid.
  2. Position the transmission fluid level indicator tube and install the bolt.
    • Tighten to 10 Nm (89 lb-in).
      Fig 2: Locating Transmission Fluid Level Indicator Tube Bolt
      G06773623Courtesy of FORD MOTOR CO.
  3. Install the transmission fluid level indicator.
    Fig 3: Locating Transmission Fluid Level Indicator
    G06140622Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals