Speed Sensor Assembly/Turbine Shaft Speed (TSS) Sensor & Intermediate Shaft Speed Sensor: Removal

WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the Turbine Shaft Speed (TSS) and intermediate shaft speed sensor connector.

Fig 1: Locating TSS And Intermediate Shaft Speed Sensor Connector
Courtesy of FORD MOTOR CO.

NOTE: Prior to removing the sensor, make sure that the area around the sensor is free of foreign material to prevent contamination entering the transmission.

Remove the TSS and intermediate shaft speed sensor.
1. Remove the bolt.
2. Remove the TSS and intermediate shaft speed sensor.
  
  Fig 2: Identifying TSS And Intermediate Shaft Speed Sensor And Bolt
  Courtesy of FORD MOTOR CO.