LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Automatic Transmission - 5R110W (TORQSHIFT(R)) -- F450 & F550 Super Duty) >> Disassembly & Assembly Of Subassemblies >> Input Shell Assembly >> Check

Input Shell Assembly: Check

WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Input Shell Assembly
G06141030Courtesy of FORD MOTOR CO.
  1. Clean and inspect the forward/reverse sun gear and input shell assembly. Check the sun gear teeth, lug teeth and thrust surface for damage. If any evidence of damage is found, a new input shell assembly must be installed.
  2. Inspect the front bushing for damage. If any damage is found a new input shell assembly must be installed.
    Fig 2: Locating Front Bushing
    G06141031Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals