Forward Geartrain - Assembly: Assembly

WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Install the forward clutch assembly into the direct clutch assembly.

Fig 1: Identifying Forward Clutch Assembly
Courtesy of FORD MOTOR CO.
Install the No. 9 forward clutch bearing.

Fig 2: Locating No. 9 Forward Clutch Bearing
Courtesy of FORD MOTOR CO.
Install the forward hub and ring gear assembly.

Fig 3: Locating Forward Hub And Ring Gear Assembly
Courtesy of FORD MOTOR CO.
Install the planet carrier and bearing assembly.

Fig 4: Locating Planet Carrier And Bearing Assembly
Courtesy of FORD MOTOR CO.
Install the No. 12 thrust bearing onto the forward carrier assembly.

Fig 5: Locating No. 12 Thrust Bearing Onto Forward Carrier Assembly
Courtesy of FORD MOTOR CO.
Install the input shell assembly.
- Make sure the tab is engaged in the forward clutch assembly.
  
  Fig 6: Locating Input Shell Assembly
  Courtesy of FORD MOTOR CO.
Install the Adapter and the Transmission Forward Clutch Assembly Installer. Position aside to use during transmission assembly.

Fig 7: Identifying Adapter And Transmission Forward Clutch Assembly Installer
Courtesy of FORD MOTOR CO.