LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Automatic Transmission - 5R110W (TORQSHIFT(R)) -- F450 & F550 Super Duty) >> Description & Operation >> Geartrain >> Input Shaft >> Output Shaft

Output Shaft

WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The output shaft is supported by a press fit radial bearing in the extension housing. It is positioned by a bushing in the forward clutch cylinder, which in turn is positioned by the case center support and the center shaft.

scientia non olet · About LEMON Manuals