LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation, Message Center, And Warning Chimes - Except Electric >> Diagnosis and Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> The Odometer Is Inoperative >> Pinpoint Test I: The Odometer Is Inoperative

Pinpoint Test I: The Odometer Is Inoperative

  1. I1: RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE ABS (ANTI-LOCK BRAKE SYSTEM) MODULE SELF-TEST 
    • Using a scan tool, perform the ABS module self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes:  REFER to: ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL .
    2. No:  GO to I2
  2. I2 CHECK FOR CORRUPTED NON-VOLATILE MEMORY (NVM) 
    • Ignition ON.
    • Observe the message center display area.

    Does the odometer display ERROR? 

    1. Yes:  INSTALL a new IPC.

      REFER to: Instrument Panel Cluster (IPC)  .

    2. No:  GO to I3
  3. I3 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST 
    • Using a scan tool, perform the IPC self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes:  For DTC U0121:00, GO to Pinpoint Test AE 

      For DTC U0140:00, GO to Pinpoint Test AF 

      For all other Diagnostic Trouble Codes (DTCs), REFER to DTC Chart: IPC  .

    2. No:  GO to I4
  4. I4 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE BCM (BODY CONTROL MODULE) SELF-TEST 
    • Using a scan tool, perform the BCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes:  REFER to: BODY CONTROL MODULE (BCM) .
    2. No:  INSTALL a new Hydraulic Control Unit (HCU).

      REFER to: HYDRAULIC CONTROL UNIT (HCU) .

scientia non olet · About LEMON Manuals