LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Drum Brake - Except Electric >> Removal and Installation >> Brake Shoes >> Installation

Brake Shoes: Installation

  1. Apply the substance from the specified tube.

    Material  : Silicone Brake Caliper Grease and Dielectric Compound / XG-3-A (ESE-M1C171-A)

    Fig 1: Locating Silicone Brake Caliper Grease And Dielectric Compound Applying Area On Parking Brake Shoe Contact Points Of Disc Brake Shield
    G08056040Courtesy of FORD MOTOR CO.
  2. To install, reverse the removal procedure.
  3. Refer to: Brake Shoe Adjustment  .
scientia non olet · About LEMON Manuals