Removal And Installation: Flexplate: Installation
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
- 1.NOTE: Special bolts are used for installation. Do not use standard bolts.
Install the flexplate and the new bolts.
Use Special Service Tool: 303-103 (T74P-6375-A) Holding Tool, Flywheel.
Torque:
Stage 1: 37 lb.ft (50 Nm)
Stage 2: 59 lb.ft (80 Nm)
Stage 3: 83 lb.ft (112 Nm)
- 2.
Install the automatic transmission. REFER to: Transmission - 2.0L Duratec-HE (125kW/170PS) - MI4 .