LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Tailgate Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the tailgate.
  2. Remove the screws, retaining clips (if equipped) and the tailgate access panel.
  3. Disconnect the tailgate latch remote control actuating rods.
  4. Remove the 2 bolts and the tailgate latch.
    • To install, tighten to 25 Nm (18 lb-ft).
  5. To install, reverse the removal procedure.