LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Ignition Lock Cylinder - Functional >> Installation

Ignition Lock Cylinder - Functional: Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure the ignition lock cylinder is in the ACC position.
  2. Insert the ignition lock cylinder into the ignition lock cylinder access hole located on the steering column.
    • Make sure to align the locking pin with the locking pin access hole.
  3. Install the Passive Anti-Theft System (PATS) transceiver. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .
  4. Rotate the ignition key through all lock cylinder positions to check for correct operation.
scientia non olet · About LEMON Manuals