Removal and Installation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Mark the position of the hood latch.
- Remove the 2 hood latch bolts.
- To install, tighten to 35 Nm (26 lb-ft).
- Turn the hood latch 180 degrees and disconnect the hood latch release cable B from the hood latch.
- Disconnect the cable conduit.
- Disconnect the cable.
- Remove the hood latch.
- To install, reverse the removal procedure.