Section 332 (Supplemental Restraint System - Pinpoint Tests A - Z)
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Pinpoint Test A: B0001:11, B0001:12, B0001:13 and B0001:1A
- Pinpoint Test B: B0002:11, B0002:12, B0002:13 and B0002:1A
- Pinpoint Test C: B0010:11, B0010:12, B0010:13 and B0010:1A
- Pinpoint Test D: B0011:11, B0011:12, B0011:13 and B0011:1A
- Pinpoint Test I: B0050:11, B0050:12, B0050:13 and B0050:1D
- Pinpoint Test J: B0052:11, B0052:12, B0052:13 and B0052:1D
- Pinpoint Test L: B0082:11, B0082:12, B0082:13 and B0082:1A
- Pinpoint Test Q: B00A0:09, B00A0:4A, B00A0:63, B00A0:64 and B00A0:68
- Pinpoint Test R: B00B5:11, B00B5:12, B00B5:13 and B00B5:1D
- Pinpoint Test S: B00C5:11, B00C5:12, B00C5:13 and B00C5:1D
- Pinpoint Test V: BXXXX:2B (any BXXXX DTC with a 2B failure type) Signal Cross Coupled
- Pinpoint Test W: BXXXX:4A (any BXXXX DTC with a 4A failure type) Incorrect Component Installed
- Pinpoint Test X: U0028:08 and U0028:88
- Pinpoint Test Y: U3003:16 and U3003:17
- Pinpoint Test Z: B0061:11, B0061:12, B0061:13, B0061:1C, and B0061:49