Symptom Chart

NOTE: Refer to DESCRIPTION AND OPERATION article, INTELLIGENT ACCESS (IA) WITH PUSH BUTTON START article in Section 419-01B to review the procedures for achieving the various ignition states (ignition off, ignition in accessory, ignition on, ignition start) on vehicles with this feature.

SYMPTOM CHART

Condition	Possible Sources	Action
Both reversing lamps are inoperative	Fuse Wiring, terminals or connectors Reversing lamps relay PCM	VERIFY the bulbs are OK. If OK, GO to PINPOINT TEST T .
An individual reversing lamp is inoperative	Wiring, terminals or connectors Bulb holder	VERIFY the bulb is OK. If OK, GO to PINPOINT TEST U .
The reversing lamps are on continuously	Wiring, terminals or connectors Reversing lamps relay Auto-dimming interior mirror Sunshade module PCM	GO to PINPOINT TEST V .