Intelligent Access (IA) with Push Button Start Ignition Modes
The IA feature does not require a conventional key to enter or start the vehicle. Once inside the vehicle, the operator activates one of the ignition modes using the brake pedal and the push button start (START/STOP) switch.
INTELLIGENT ACCESS (IA) WITH PUSH BUTTON START IGNITION MODES
| Ignition Entry Condition | Desired Ignition Modes | Action |
|---|---|---|
| Ignition off | Accessory | Do NOT press the brake pedal, but push the START/STOP switch for less than one second. |
| Ignition off | On (engine off) | Do NOT press the brake pedal, but push the START/STOP switch for longer than one second. |
| Ignition off | Start | Press and hold the brake pedal and then push the START/STOP switch (switch does not need to be pressed a specific period of time). |
| Any ignition position except ignition off | Ignition off | Push the START/STOP switch (the brake pedal does not need to be pressed). |
| Accessory | Start | Press and hold the brake pedal and then push the START/STOP switch (switch does not need to be pressed a specific period of time). |
| On (vehicle in motion) | Ignition off | Press and hold the start/stop switch for approximately 1 second. On some vehicles, press the start/stop switch 3 times within 2 seconds. |