Symptom Chart

NOTE: Refer to DESCRIPTION AND OPERATION article, INTELLIGENT ACCESS (IA) WITH PUSH BUTTON START article in Section 419-01B to review the procedures for achieving the various ignition states (ignition off, ignition in accessory, ignition on, ignition start) on vehicles with this feature.

SYMPTOM CHART

Condition	Possible Sources	Action
The Daytime Running Lamps (DRL) are inoperative	Fuse Wiring, terminals or connectors DRL relay Headlamp relay Exterior lighting system input/output Smart Junction Box (SJB) configuration Ignition switch input Transaxle gear input SJB	GO to PINPOINT TEST W .
The Daytime Running Lamps (DRL) are always on	Wiring, terminals or connectors DRL relay Exterior lighting system input/output SJB	GO to PINPOINT TEST X .
The LH headlamp is on and the RH headlamp is inoperative when the DRL are active	Wiring, terminals or connectors	REPAIR circuit SBB16 (VT/RD) for a short to ground between the headlamp relays. TEST the system for normal operation.