Engine Controls - Pinpoint Test JB: Secondary Ignition (Cop) Through Pinpoint Test KF: Fan Control (FC) Relays - (Except Diesel & Hybrid)

• PINPOINT TEST JB: Secondary Ignition (COP)
  • Introduction
  • Test Procedure
• PINPOINT TEST JC: Secondary Ignition (Coil Pack)
  • Introduction
  • Test Procedures
• PINPOINT TEST JD: Crankshaft Position (CKP) Sensor
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST JE: Integrated Ignition Coil Pack A, B, or C Failure
  • Introduction
    • Notes
    • Pinpoint Test Schematics and Connectors
  • Test Procedure
• PINPOINT TEST JF: Integrated Ignition Coil On Plug Coils A Through J Failure
  • Notes
  • Introduction
  • Test Procedures
• PINPOINT TEST KA: Fuel Pump (FP) Relay
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST KB: Fuel Pump Driver Module (FPDM)
  • Notes
  • Introduction
  • Test Procedures
• PINPOINT TEST KC: Fuel Pump Control Module
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST KD: Electric Exhaust Gas Recirculation (EEGR) System
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST KE: Idle Air Control (IAC) Valve
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST KF: Fan Control (FC) Relays
  • Notes
  • Introduction
  • Test Procedure