LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F50 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnostic Routine(S) >> Diagnostic Routine V >> Pinpoint Test

Pinpoint Test

  1. CHECK THE MESSAGE CENTER WARNING INDICATOR FUNCTION
    1. Close all doors, hood and liftgate.
    2. Ignition ON.
      NOTE: If multiple warnings are present, the message center cycles through each of the warning indicators. Allow the message center to cycle through each display while determining whether the door ajar message center warning indicator is active.
    3. Open the driver door while monitoring the door ajar message center warning indicator.
    • Does the driver door ajar message center warning indicator turn off with the driver door closed and turn on with the driver door open? 
    1. Yes:  GO to on page 2.
    2. No:  INSTALL a new Instrument Panel Cluster (IPC). REFER to INSTRUMENT PANEL CLUSTER (IPC) .
  2. RETRIEVE THE RECORDED Diagnostic Trouble Codes (DTCs) FROM THE Instrument Panel Cluster (IPC) SELF-TEST
    1. Using a scan tool, perform the Instrument Panel Cluster (IPC) self-test.
    • Are any Diagnostic Trouble Codes (DTCs) recorded? 
    1. Yes:  For DTC U0100:00, REFER to Diagnostic Routine AR .

      For all other Diagnostic Trouble Codes (DTCs), REFER to DTC CHART: INSTRUMENT PANEL CLUSTER (IPC) .

    2. No:  GO to on page 2.
  3. RETRIEVE THE RECORDED Diagnostic Trouble Codes (DTCs) FROM THE Powertrain Control Module (PCM) Key ON Engine OFF (KOEO) SELF-TEST
  1. Using a scan tool, perform the Powertrain Control Module (PCM) Key ON Engine OFF (KOEO) self-test.
  1. Yes:  REFER to DTC CHART: POWERTRAIN CONTROL MODULE (PCM) .
  2. No:  INSTALL a new Instrument Panel Cluster (IPC). REFER to INSTRUMENT PANEL CLUSTER (IPC) .