LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F50 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnostic Routine(S) >> Diagnostic Routine AQ >> Pinpoint Test

Pinpoint Test

  1. CHECK THE SAFETY BELT WARNING CHIME OPERATION
    1. Ignition OFF.
    2. Ignition ON.
    3. Monitor the safety belt warning chime when the ignition switch is transitioned from OFF to RUN.
    • Does the safety belt warning chime operate for approximately 6 seconds? 
    1. Yes:  GO to 2  on page 2.
    2. No:  INSTALL a new Instrument Panel Cluster (IPC). REFER to INSTRUMENT PANEL CLUSTER (IPC) .
  2. CHECK THE BRAKE WARNING INDICATOR OPERATION
    1. Apply the parking brake.
    2. Ignition ON.
    3. Observe the brake warning indicator.
    • Does the brake warning indicator illuminate? 
    1. Yes:  GO to 3  on page 2.
    2. No:  REFER to Diagnostic Routine K .
  3. RETRIEVE THE RECORDED Diagnostic Trouble Codes (DTCs) FROM THE Instrument Panel Cluster (IPC) SELF-TEST
    1. Using a scan tool, perform the Instrument Panel Cluster (IPC) self-test.
    • Are any Diagnostic Trouble Codes (DTCs) recorded? 
    1. Yes:  For Diagnostic Trouble Code (DTC) U0140:00, REFER to Diagnostic Routine AV .

      For all other Diagnostic Trouble Codes (DTCs), REFER to DTC CHART: INSTRUMENT PANEL CLUSTER (IPC) .

    2. No:  GO to 4  on page 2.
  4. RETRIEVE THE RECORDED Diagnostic Trouble Codes (DTCs) FROM THE Body Control Module (BCM) SELF-TEST
  1. Using a scan tool, perform the Body Control Module (BCM) self-test.
  1. Yes:  REFER to DTC CHART: BODY CONTROL MODULE (BCM) .
  2. No:  INSTALL a new Body Control Module (BCM). REFER to BODY CONTROL MODULE (BCM) - WITH INTELLIGENT ACCESS (IA) or REFER to BODY CONTROL MODULE (BCM) - WITHOUT INTELLIGENT ACCESS (IA) .
scientia non olet · About LEMON Manuals