LEMON Manuals
: Even more car manuals for everyone
Home
>>
Ford
>>
2011
>>
Escape Base, 2.5 7, AWD, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 19 (Engine Cooling (Hybrid))
Section 19 (Engine Cooling (Hybrid))
WARNING:
This page is about a different variant/trim than selected.
Expand All (for easy ctrl-f)
Collapse All
Specifications
Material Specifications
General Specifications
Torque Specifications
Description And Operation
Engine Cooling
Notes
Coolant Flow Diagram
Diagnosis And Testing
Engine Cooling
Special Tool(s)
Material Specifications
Principles of Operation
Inspection and Verification
DTC Chart
PCM DTC Chart
Symptom Chart
Pinpoint Tests
Pinpoint Test A: Loss of Coolant
Normal Operation
Pinpoint Test A: Loss Of Coolant
Pinpoint Test B: The Engine Overheats
Normal Operation
Pinpoint Test B: The Engine Overheats
Pinpoint Test C: The Engine Does Not Reach Normal Operating Temperature
Normal Operation
Pinpoint Test C: The Engine Does Not Reach Normal Operating Temperature
Component Tests
Pressure Test
Thermostat
Thermostat Visual Inspection
Radiator Leak Test, Removed From Vehicle
General Procedures
Cooling System Draining, Filling and Bleeding
Special Tool(s)
Material Specifications
Draining
Filling and Bleeding with a Vacuum Cooling System Filler
Filling and Bleeding without a Vacuum Cooling System Filler
Cooling System Flushing
Material Specifications
Removal And Installation
Thermostat Housing
Notes
Removal and Installation
Bypass Tube
Notes
Removal and Installation
Coolant Pump
Material Specifications
Removal and Installation
Cooling Fan Motor and Shroud
Notes
Removal and Installation
Radiator
Notes
Removal and Installation
Degas Bottle
Notes
Removal and Installation