LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Information Center - Instrument Cluster (Ic), Message Center, & Warning Chimes >> Removal And Installation >> Instrument Cluster (IC) >> Removal

Instrument Cluster (IC): Removal

  1. If installing a new instrument cluster (IC), upload the module configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION article.
  2. Remove the instrument cluster (IC) finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  3. Remove the 4 screws and the instrument cluster (IC).
    • Disconnect the electrical connector.
scientia non olet · About LEMON Manuals