LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Engine - 3.0L (2V)) >> In-Vehicle Servicing >> Oil Pan Baffle >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to Engine Lubrication Components - Exploded View  and Oil Pan - Rear Wheel Drive (RWD)  or Oil Pan - Four Wheel Drive (4WD) .
  2. Remove the 7 nuts and the oil pan baffle.
    • To install, tighten to 32 Nm (24 lb-ft).
  3. To install reverse the removal procedure.
scientia non olet · About LEMON Manuals