LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Engine - 3.0L (2V)) >> In-Vehicle Servicing >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft vibration damper. For additional information, refer to Lower End Components - Exploded View  and Crankshaft Pulley  in this article.
  2. Remove the crankshaft front seal.
    Fig 1: Locating Crankshaft Front Seal
    GF0009118Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals