LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1983 (Information Center - Instrumentation, Message Center And Warning Chimes) >> General Procedures >> Belt-Minder® Deactivating/Activating >> Preparation

Belt-Minder® Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The Belt-Minder® deactivating/activating can also be carried out using a scan tool.
  1. Apply the parking brake before deactivating/activating the Belt-Minder®.
  2. Place the gear selector lever in PARK (P).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver and the front passenger safety belts.
scientia non olet · About LEMON Manuals