LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1983 (Information Center - Instrumentation, Message Center And Warning Chimes) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Principles of Operation >> Instrument Cluster (IC) >> IC Configuration

IC Configuration

WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The IC  contains items that are configurable. Configurable items include customer preference items, which can also be set with a scan tool. The remaining configurable items can be set only through the Programmable Module Installation (PMI) procedure or by using As-Built data. Refer to MODULE CONFIGURATION .

NOTE: When installing a new IC  , it is necessary to upload the module configuration to the scan tool. Following installation of the IC  , download the module configuration from the scan tool into the new IC  . Refer to MODULE CONFIGURATION . It is also necessary to carry out a parameter reset procedure whenever a new IC  or PCM is installed. Refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .
scientia non olet · About LEMON Manuals