Engine Controls - Pinpoint Test KP: Charge Air Cooler (CAC) Pump Through Pinpoint Test Z: Intermittent - (Except Diesel & Hybrid)

• PINPOINT TEST KP: Charge Air Cooler (CAC) Pump
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST NC: Ignition Engine Speed Input Circuit
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST ND: Engine RPM\Vehicle Speed Limiter Reached
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST QA: Unable to Activate Self-Test/Network Communication Error
  • Introduction
  • Test Procedure
• PINPOINT TEST QB: DTCs P0603 or P1633: Keep Alive Power (KAPWR)
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST QC: DTC P1000: On-Board Diagnostic (OBD) Systems Readiness Test Not Complete
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST QD: DTC P1260: Passive Anti-Theft System
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST QE: Electronic Throttle Control (ETC) System
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST TA: Clutch Pedal Position (CPP) Switch
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST TB: Transmission Control Switch (TCS)/ Transmission Control Indicator Lamp (TCIL)
  • Notes
  • Introduction
  • Test Procedure
• PINPOINT TEST Z: Intermittent
  • Notes
  • Introduction
  • Test Procedure