System Airflow Description: Panel/Floor
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
When PANEL/FLOOR is selected:
- The air inlet blend door is at no vacuum, blocking the recirculation passage and allowing outside air.
- The footwell blend door and the panel airflow door are in the full vacuum position, allowing airflow to blend between the panel vents and the footwell ducts.
- The defrost airflow door is at full vacuum, closing off airflow to the windshield defroster hose nozzle and directing airflow to the heater outlet footwell duct.
- The A/C compressor is disabled.
- The blower motor is ON.