Section 964 (Climate Control System - General Information And Diagnostics - (Except Hybrid))
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnostic Tests
- Climate Control System
- Notes
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: Incorrect/Erratic Direction of Airflow From Outlets
- Pinpoint Test B: Insufficient, Erratic or No Heat
- Pinpoint Test C: The Air Conditioning (A/C) is Inoperative
- Pinpoint Test D: The Air Conditioner (A/C) is Always On
- Pinpoint Test E: Temperature Control is Inoperative
- Pinpoint Test F: The Blower Motor is Inoperative
- Pinpoint Test G: No Operation in High Blower Setting
- Pinpoint Test H: No Operation in Lower Speeds
- Pinpoint Test I: No Operation in Some Blower Speeds
- Component Tests
- Climate Control System
- General Procedures
- Air Conditioning (A/C) Odor Treatment
- Spring Lock Coupling
- Air Conditioning Line (Peanut) Fitting
- Refrigerant System Tests
- Air Conditioning (A/C) Clutch Air Gap Adjustment
- Electronic Leak Detection
- Fluorescent Dye Leak Detection
- Air Conditioning (A/C) System Flushing
- Air Conditioning (A/C) System Recovery, Evacuation and Charging
- Refrigerant System Filtering Following Air Conditioning (A/C) Compressor Installation
- Refrigerant Oil Adding
- Refrigerant Identification Testing
- Vacuum Hose Repair