LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Removal And Installation >> Cooling Fan Motor and Shroud >> Removal and Installation

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
    2. NOTE: The fan shroud and electric cooling fans are serviced as an assembly.
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY MOUNTING AND CABLES .
  3. Disconnect the dual electric cooling fan electrical connectors.
  4. Lift and remove the cooling fan motors and shroud from the retainer brackets and lower from the vehicle.
    Fig 1: Removing Cooling Fan Motors And Shroud From Retainer Brackets
    G04652502Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals