LEMON Manuals
: Even more car manuals for everyone
Home
>>
Ford
>>
2006
>>
Focus ZX5 SE, Standard
>>
Repair and Diagnosis (Single Page)
>>
Engine Mechanical
>>
Cooling System (Mechanical)
>>
Engine Cooling
Engine Cooling
Expand All (for easy ctrl-f)
Collapse All
Specifications
General Specifications
Torque Specifications
Description And Operation
Engine Cooling
Notes
Fail Safe Cooling
Diagnosis And Testing
Engine Cooling
Special Tool(s)
Materials
Principles of Operation
Inspection and Verification
Powertrain Control Module (PCM) DTC Chart
Symptom Chart
Pinpoint Tests
Pinpoint Test A: Loss of Coolant
Normal Operation
This pinpoint test is intended to diagnose the following:
Pinpoint Test A: Loss Of Coolant
Pinpoint Test B: The Engine Overheats
Normal Operation
This pinpoint test is intended to diagnose the following:
Pinpoint Test B: The Engine Overheats
Pinpoint Test C: The Engine Does Not Reach Normal Operating Temperature
Normal Operation
This pinpoint test is intended to diagnose the following:
Pinpoint Test C: The Engine Does Not Reach Normal Operating Temperature
Component Tests
Pressure Test - Degas Bottle Systems
Pressure Test - Coolant Expansion Tank Systems
Cap
Thermostat
Notes
Thermostat Visual Inspection
Radiator Leak Test, Removed From Vehicle
Fan Clutch Test
Notes
Fan Clutch Test - Minimum Speed Requirement
Fan Clutch Test - Maximum Speed Requirement
General Procedures
Cooling System Draining, Filling and Bleeding
Special Tool(s)
Materials
Draining
Filling and Bleeding with RADKITPLUS
Filling and Bleeding without RADKITPLUS
Cooling System Flushing
Removal And Installation
Thermostat Housing
Notes
Removal and Installation
Coolant Pump
Notes
Removal and Installation
Radiator and Cooling Fan - Exploded View
Radiator
Cooling Fan Motor and Shroud
Removal and Installation
Degas Bottle
Notes
Removal and Installation
Block Heater