DTC P2015: Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 1)
WARNING: This page is about a different variant/trim than selected.
P2015 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT RANGE/PERFORMANCE (BANK 1)
| Description: | The intake manifold runner control (IMRC) system is monitored for failures. Each DTC distinguishes the corresponding failed bank. The test fails when the system detects the presence of a broken or persistently out of range linkage. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to HU: Intake Air Systems STEP HU14. | ||