Section 38 (Engine Controls - Pinpoint Test Hg: Positive Crankcase Ventilation (PCV) System Through Pinpoint Test JD: Crankshaft Position (CKP) Sensor - (Except Diesel & Hybrid))

• Pinpoint Test HG: Positive Crankcase Ventilation (PCV) System
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test HH: Exhaust Gas Recirculation System Module (ESM)
  • Notes
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test HK: Variable Cam Timing (VCT)
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test HL: Dual-Injection Fuel Delivery System
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test HM: Secondary Air Injection (AIR) System
  • Notes
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test HU: Intake Air Systems
  • Introduction
    • Notes
    • Intake Air System
    • Intake Manifold Runner Control Monitor (IMRCM) Sensor Connector
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test HX: Evaporative Emission (EVAP) Monitor and System
  • Notes
  • Introduction
    • Notes
    • Typical EVAP System
      • Notes
      • Canister Vent Solenoid (CANV) Connector
      • EVAP Canister Purge (EVAPCP) Valve Connector
      • Fuel Tank Pressure (FTP) Sensor Connector
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test HY: Generator/Regulator System
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test JB: Secondary Ignition (COP)
  • Introduction
  • Test Procedure
• Pinpoint Test JC: Secondary Ignition (Coil Pack)
  • Introduction
  • Test Procedure
• Pinpoint Test JD: Crankshaft Position (CKP) Sensor
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure