DTC P1513: Intake Manifold Runner Control (IMRC) Stuck Closed (Bank 2)
WARNING: This page is about a different variant/trim than selected.
P1513 - INTAKE MANIFOLD RUNNER CONTROL (IMRC) STUCK CLOSED (BANK 2)
| Description: | This DTC is set when the vacuum actuated IMRC is commanded open, but the intake manifold runner control monitor (IMRCM) indicates closed. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to HU: Intake Air Systems STEP HU14. |