DTC P1385: Variable Camshaft Timing (VCT) Solenoid A Circuit Malfunction (Bank 2)
WARNING: This page is about a different variant/trim than selected.
P1385 - VARIABLE CAMSHAFT TIMING (VCT) SOLENOID A CIRCUIT MALFUNCTION (BANK 2)
| Description: | The comprehensive component monitor (CCM) monitors the VCT circuit to the powertrain control module (PCM) for high and low voltage. If the voltage falls below a calibrated limit a calibrated amount of time during testing, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC is a circuit check. Testing should include the harness and solenoid coil. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to HK: Variable Cam Timing (VCT) STEP HK1. | ||