DTC P1336: Crankshaft Position (CKP) and/or Camshaft Position (CMP) Input Signal to the PCM Concerns
WARNING: This page is about a different variant/trim than selected.
P1336 - CRANKSHAFT POSITION (CKP) AND/OR CAMSHAFT POSITION (CMP) INPUT SIGNAL TO PCM CONCERNS
| Description: | The input signal to the powertrain control module (PCM) from the CKP sensor and/or the CMP sensor is erratic. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the harness for routing, alterations, improper shielding, or electrical interference from other improperly functioning systems. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to JD: Crankshaft Position (CKP) Sensor STEP JD1. |