DTC P0622: Generator Field Terminal Circuit Failure
WARNING: This page is about a different variant/trim than selected.
P0622 - GENERATOR FIELD TERMINAL CIRCUIT FAILURE
| Description: | The powertrain control module (PCM) monitors the generator load from the generator/regulator in the form of frequency. The frequency range is determined by the temperature of the voltage regulator, where 97% indicates a full load, and less than 6% indicates no load. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Verify the battery voltage is 14.5 volts. Verify the generator/regulator has the correct part number. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to HY: Generator/Regulator System STEP HY1. | ||