DTC P0219: Engine Over Speed Condition
WARNING: This page is about a different variant/trim than selected.
P0219 - ENGINE OVER SPEED CONDITION
| Description: | Indicates the vehicle has been operated in a manner which caused the engine speed to exceed a calibrated limit. The engine RPM is continuously monitored and evaluated by the powertrain control module (PCM). The DTC is set when the RPM exceeds the calibrated limit set within the PCM. For additional information on the engine RPM limiter, refer to POWERTRAIN CONTROL SOFTWARE . | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The DTC indicates the vehicle has been operated in a manner which caused the engine speed to exceed a calibrated limit. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to ND: Engine RPM\Vehicle Speed Limiter Reached STEP ND1. |