DTC P020x: Cylinder Injector Circuits
WARNING: This page is about a different variant/trim than selected.
NOTE:
'x' equals any number 0 through 9 or letter A through F.
P020X - CYLINDER INJECTOR CIRCUITS
| Description: | The comprehensive component monitor (CCM) monitors the operation of the fuel injector drivers in the powertrain control module (PCM). The test fails when the fuel injector circuitry is inoperative.
NOTE:
x represents injector number 1 through 9.
|
||
| Possible Causes: |
|
||
| Diagnostic Aids: | PID Data Monitor INJxF fault flags equals YES. For the Ford GT, this DTC is set when a fault is detected in the circuit between the PCM and the FICM. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Ford GT | GO to HL: Dual-Injection Fuel Delivery System STEP HL3. | GO to HL: Dual-Injection Fuel Delivery System STEP HL3. | GO to HL: Dual-Injection Fuel Delivery System STEP HL1. |
| All others | GO to H: Fuel Control STEP H34. | ||