Pinpoint Test TA: Clutch Pedal Position (CPP) Switch: Introduction: Notes

WARNING: This page is about a different variant/trim than selected.

This pinpoint test is intended to diagnose the following:

CPP(11A152/7C534).
Harness circuits: CPP / CPP BT and SIGRTN.
Powertrain control module (PCM) (12A650).

Fig 1: Clutch Pedal Position (CPP) Connector (1 Of 2)
Courtesy of FORD MOTOR CO.

Fig 2: Clutch Pedal Position (CPP) Connector (2 Of 2)
Courtesy of FORD MOTOR CO.