LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Engine Controls - Pinpoint Test NB: Malfunction Indicator Lamp Through Pinpoint Test Z: Intermittent - (Except Diesel & Hybrid)) >> Pinpoint Test ND: Engine RPM\Vehicle Speed Limiter Reached >> Test Procedure

Test Procedure

WARNING: This page is about a different variant/trim than selected.
  1. ND1 DTCS P0219, P0297 OR P1270: EXCESSIVE ENGINE RPM OR VEHICLE SPEED 
    • P0219 (engine over speed), P0297 (vehicle over speed) or P1270 Diagnostic Trouble Codes indicate the vehicle was operated in a manner which caused the engine or vehicle speed to exceed a calibrated limit.
      • Excessive engine RPM in NEUTRAL or operated in the wrong transmission gear.
      • Excessive wheel slippage (water, ice, mud or snow).
      • Vehicle driven at a high rate of speed.

    Was the vehicle operating in any of the above conditions? 

    Yes No
    The OBD system is OK.
    RETURN the vehicle to customer with information about the DTC
    REFER to STEP 2: NO DTC(S) PRESENT SYMPTOM CHART INDEX .
    If there are no other symptoms, RETURN the vehicle to the customer with information about the DTC.