- No communication with the instrument cluster module
|
- Central junction box (CJB) fuses:
- 4 (5A).
- 13 (5A).
- 17 (5A).
- 20 (10A).
- J1850 standard corporate protocol (SCP) communication network.
- Circuitry.
- Instrument cluster.
|
|
- All the chimes are inoperative
|
|
- INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . CLEAR the DTCs. REPEAT the self-test.
|
- The chime sounds when the driver door is ajar (no key in ignition and headlamps OFF)
|
- Circuitry.
- Key-in-ignition switch.
- Headlamp switch.
- Instrument cluster.
|
|
- The safety belt warning chime does not operate correctly
|
- Circuitry.
- Driver safety belt switch.
- Instrument cluster.
|
|
- The key-in-ignition chime does not operate correctly
|
- Battery junction box (BJB) fuse 22 (20A).
- Circuitry.
- Key-in-ignition switch.
- Driver door ajar switch.
- Instrument cluster.
|
|
- The headlamp on reminder chime does not operate correctly
|
- Circuitry.
- Headlamp switch.
- Driver door ajar switch.
- Instrument cluster.
|
|
- The air bag warning chime does not operate correctly
|
- Circuitry.
- Instrument cluster.
- Restraint control module (RCM).
|
|
- The fail-safe cooling chime does not operate correctly
|
- Circuitry.
- Instrument cluster.
|
|
- The turn signal reminder chime does not operate correctly
|
- Circuitry.
- Instrument cluster.
|
|
- The belt minder feature does not operate correctly
|
- Circuitry.
- Driver safety belt switch.
- Instrument cluster.
|
|