Special Tool(s)

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOLS DESCRIPTION CHART

	Installer, Output Shaft Seal 307-650
	Remover/Installer, Drive Pinion Oil Seal 205-440
	Remover, Torque Converter Fluid Seal 307-309 (T94P-77001-A)
	Slide Hammer 100-001 (T50T-100-A)
	Socket, Output Shaft Nut 307-649
	Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool

Fig 1: Exploded View Of Output Shaft Seal With Torque Specifications - Flange Yoke

Courtesy of FORD MOTOR CO.

OUTPUT SHAFT SEAL PARTS DESCRIPTION CHART - FLANGE YOKE, 4WD

Item	Part Number	Description
1	N811880	Driveshaft flange bolts (4 required)
2	4602	Driveshaft
3	-	Output shaft flange bolt (part of 7089)
4	-	Output shaft flange washer (part of 7089)
5	7089	Output shaft flange
6	7085	Output shaft nut
7	7052	Output shaft seal