LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2585 (Automatic Transmission - 6R140 (TORQSHIFT(R)6)) -- F250-F550 Super Duty) >> Diagnosis And Testing >> Diagnosis By Symptom >> Diagnostic Routines >> Shift Concerns: Harsh (some or all)

Shift Concerns: Harsh (some or all)

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SHIFT CONCERNS - HARSH (SOME OR ALL)

Possible Component Reference/Action
214 - ROUTINE 
Powertrain Control System   
  • PCM (gasoline engines), Transmission Control Module (TCM) (diesel engines), external vehicle harness, transmission internal harness, Shift Solenoid A (SSA), Shift Solenoid B (SSB), Shift Solenoid C (SSC), Shift Solenoid D (SSD), Shift Solenoid E (SSE), Pressure Control Solenoid A (PCA), Turbine Shaft Speed (TSS), Output Shaft Speed (OSS) or Transmission Fluid Temperature (TFT)
  • CARRY OUT the Key ON Engine OFF (KOEO) and Key ON Engine Running (KOER) self-test. READ and RECORD the DTC(s). Go to the appropriate pinpoint test for that DTC. REPAIR as required. CLEAR the DTCs. TEST the vehicle system for normal operation.
Main Control   
  • Main control contaminated, solenoid(s) damaged, solenoids stuck or bore damaged
  • INSPECT for damage and/or contamination.
  • Manual valve damaged, stuck or bore damaged
  • INSPECT for damage and/or contamination.