LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Excursion 7.3 F, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 353 (Manual Transmission, Clutch & Transfer Case - General Information - Excursion & F250-F550 Super Duty) >> Diagnosis And Testing >> Manual Transmission and Clutch >> Clutch Drag Inspection and Verification

Clutch Drag Inspection and Verification

WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford F550 Super Duty, and 2002 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the clutch hydraulic fluid reservoir is filled to the correct level.
    • If the fluid level is correct, proceed to the next step in this procedure.
    • If the fluid level is low, add fluid as necessary. Inspect the clutch hydraulic system for leaks, and repair as necessary. Refer to CLUTCH CONTROLS . Test the system for normal operation. Proceed to the next step in this procedure, if necessary.
  2. Depress and release the clutch pedal to check for a spongy pedal.
    • If the pedal feels OK, proceed to the next step in this procedure.
    • If the pedal feels spongy, bleed the clutch hydraulic system. Refer to CLUTCH SYSTEM BLEEDING - IN-VEHICLE . Test the system for normal operation. Proceed to the next step in this procedure, if necessary.
  3. Remove the clutch disc and pressure plate. Refer to CLUTCH . Inspect the clutch disc and pressure plate for wear and damage, and check the clutch disc runout. Refer to CLUTCH PRESSURE PLATE CHECK  and to CLUTCH DISC CHECK . Repair all components as necessary. Test the system for normal operation.
scientia non olet · About LEMON Manuals