LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission - Diagnosis - Ax4S) >> Diagnosis & Testing >> Transaxle Dynamic Drive Cycle Test >> Transmission Tester Removal & Clearing DTCs

Transmission Tester Removal & Clearing DTCs

WARNING: This page is about a different variant/trim than selected.

Disconnect Transmission Tester from transaxle connector. Install vehicle wiring harness to transaxle connector. Install all heat shields that were removed. Disconnect tester power lead from vehicle. See CLEARING DIAGNOSTIC TROUBLE CODES  to clear any DTCs that were set. Perform QUICK TEST  to determine if any DTCs are present.