LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission - Diagnosis - Ax4S) >> Diagnosis & Testing >> Transaxle Dynamic Drive Cycle Test >> Preliminary Set Up

Preliminary Set Up

WARNING: This page is about a different variant/trim than selected.

Connect Transmission Tester (007-00130). Install pressure gauge to line pressure tap. See HYDRAULIC PRESSURE TESTS under PERFORMANCE TESTS in FORD AX4S OVERHAUL article. Set Bench/Drive switch to DRIVE mode. Rotate gear select switch to "1" position. Ensure gearshift lever is in "P" position. Start engine.

scientia non olet · About LEMON Manuals