LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission - Diagnosis - Ax4S) >> Diagnosis & Testing >> Transaxle Drive Cycle Test >> Test Procedure

Test Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Record and then clear DTCs retrieved during QUICK TEST  procedure. Warm engine to normal operating temperature. Ensure transmission fluid level is correct. Place gearshift lever in "OD" position.
  2. Accelerate from stop to 50 MPH. Hold speed for at least 15 seconds. While maintaining speed with transaxle in 4th gear, lightly depress brake pedal and release. Maintain speed for additional 5 seconds. Bring vehicle to stop for at least 20 seconds. Repeat steps 1)  and 2)  at least 5 times. Perform QUICK TEST  and record continuous memory codes.
scientia non olet · About LEMON Manuals