LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1400 (HVAC - Climate Control System) >> Removal And Installation >> Register - RH, MKZ >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to REMOVAL AND INSTALLATION (Fusion, Milan) and REMOVAL AND INSTALLATION (MKZ) .
  2. Lower the glove compartment.
  3. Remove the 4 RH instrument panel finish molding screws.
  4. Remove the RH instrument panel finish molding.
  5. Remove the RH register screw.
  6. Remove the RH register.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals