LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Self-Diagnostics - EEC-V (Bi-Fuel)) >> Additional System Functions >> Drive Cycles >> Catalyst Monitor Repair Verification Drive Cycle

Catalyst Monitor Repair Verification Drive Cycle

WARNING: This page is about a different car, the 2000 Mercury Mystique, 2000 Ford Pickup, 2000 Ford F550 Super Duty, 2000 Ford F450 Super Duty, and 2000 Ford Contour. However, it is still accessible from the selected car via links, so may be relevant.

Ambient air temperature or IAT PID must read a minimum of 32°F (0°C) to initiate catalyst monitor. Perform VEHICLE PREPARATION . Drive vehicle in stop and go traffic for 20 minutes. Include 6 different constant speeds between 25-45 MPH. Drive on expressway or freeway for an additional 5 minutes. Repeat QUICK TEST .

scientia non olet · About LEMON Manuals