LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN U & 2 >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

  1. To install, reverse removal procedure. Tighten all bolts to specification. See TORQUE SPECIFICATIONS .
  2. When installing fuel lines, install NEW "O" rings on fuel lines. Use only specified Brown fuel resistant "O" rings. Lightly coat "O" rings with clean engine oil before installing. Clean fittings and replace garter spring (if necessary).
  3. Adjust all control cables and fluid levels. Refill cooling system. Evacuate and recharge A/C system.
scientia non olet · About LEMON Manuals