Reassembly & Installation

To reassemble, reverse disassembly procedure. Ensure components are installed in original location. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Fill crankcase.

OIL PUMP SPECIFICATIONS

Application

In. (mm)

Drive Shaft-To-Housing Clearance

.0005-.0019 (.013-.048)

Gear Backlash

.008-.012 (.20-.31)

Gear Height Clearance

.0005-.0055 (.013-.069)

Idler Shaft-To-Idler Gear

.0005-.0017 (.013-.043)

Idler Gear-To-Driver Gear Radial Clearance

.002-.006 (.050-.125)

Relief Valve Spring Tension

⁽¹⁾

Relief Valve-To-Bore Clearance

.0017-.0029 (.043-.073)

⁽¹⁾	Tension should be 9-10 lbs. @ 1.11" (4.08-4.54 kg @ 28.2 mm).